Home/Jeep/Commander/Jeep Commander I (2005-2010)/Repair manual/Accessory Drive Belts/Engine Cooling System & Automatic Transmission Cooling Syst…
Contents Wiring diagrams Section: Accessory Drive Belts All sections

Engine Cooling System & Automatic Transmission Cooling System: Specifications Jeep Commander I

TORQUE

DESCRIPTIONN.mFt. Lbs.In. Lbs.
Automatic Belt Tensioner to Mounting Bracket Bolt
3.7L4130
4.7L4130
5.7L4130
3.0L DIESEL4730
Automatic Belt Tensioner Pulley Bolt
3.7L6145
4.7L6145
5.7L6145
Block Heater Bolt
3.7L217
4.7L217
5.7L217
Fan Blade Assembly to Viscous Drive Bolts
4.7L23200
Generator Mounting Bolts 4.7L5742
Radiator Upper Isolator to Crossmember Nuts320
Radiator Upper Isolator to Radiator Nuts436
Radiator Brace Bolts1089
Thermostat Housing Bolts
3.7L2216
4.7L13115
5.7L13115
3.0L DIESEL980
Upper Radiator Crossmember to Body Bolts1089
Water Pump Bolts
3.7L2317
4.7L(1)
5.7L2418
3.0L DIESEL
M61424
M820177
Water Pump Pulley to Water Pump Bolts
3.7L28250
High Pressure Inlet Hose to Hydraulic Fan Drive (1/2 inch Fitting)4936
High Pressure Outlet Hose to Steering Gear (3/8 inch Fitting)2922
Fan Shroud to Radiator Mounting Bolts650
(1) For appropriate bolt tightening specification, refer to FASTENER IDENTIFICATION .
(1)For appropriate bolt tightening specification, refer to FASTENER IDENTIFICATION .

TORQUE SPECIFICATIONS