ENGINE MOUNT Jeep Commander I

ENGINE MOUNT

1. Install the engine mount (1).
2. Tighten the bolts to 30 N.m (22 ft. lbs.).
3. Lower the engine.
4. Install the through bolts and nuts.
5. Lower vehicle.
6. Connect negative battery cable.

Scheme 434

1. Raise the vehicle on a hoist.
2. Using a suitable jack, support transmission.
3. Remove the crossmember.
4. Remove the fasteners (1) from the transmission mount to transmission.
5. Remove the mount (3).
6. Remove the transmission mount bracket (2), if required.

Scheme 435

1. Raise the vehicle on a hoist.
2. Using a suitable jack, support transmission.
3. Remove the crossmember.
4. Remove the fasteners (2) from the transmission mount (1) to transmission.
5. Remove the mount.