Home/Jeep/Cherokee/Jeep Cherokee II рестайлинг (1997-2001)/Repair manual/Wheel Alignment/Wheel Alignment Specifications & Adjustment Procedures: Spe…
Contents Section: Wheel Alignment All sections

Wheel Alignment Specifications & Adjustment Procedures: Specifications Jeep Cherokee II рестайлинг

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Drag Link Sleeve Clamp Bolts
Except 1999 Grand Cherokee36 (49)
1999 Grand Cherokee50 (68)
Lower Control Arm Nuts85 (115)
Axle Bracket Nut85 (115)
Frame Bracket Nut130 (176)
Tie Rod Sleeve Clamp Bolts
Except 1998 Grand Cherokee (8-Cyl.) & 1999 Grand Cherokee20 (27)
1998 Grand Cherokee (8-Cyl.)36 (49)
1999 Grand Cherokee50 (68)
Wheel Lug Nut85-115 (115-150)

TORQUE SPECIFICATIONS

ApplicationPreferredRange
Cherokee
Camber (1)0.250.75 To 0.50
Caster (1)75.25 To 8.00
Toe-In (1)00.20 To 0.50
Toe-In (2)0 (0)0.1 To 0.25 (-2.5 To 6.5)
1998 Grand Cherokee
Camber (1)(3)1.13 To 0.13
Caster (1)76.50 To 7.50
Toe-In (1)
Front0.240 To 0.44
Rear00.05 To 0.5
Toe-In (2)
Front0.12 (3)0 To 0.22 (0.0 To 5.5)
Rear0 (0)0.25 To 0.25 (-6.5 To 6.5)
1999 Grand Cherokee (Standard Suspension)
Camber (1)
Front(3)0.5 To 0
Rear(3)0.5 To 0
Caster(3)6 To 8
Toe-In (1)
Front0.240 To 0.48
Rear00 To 0.5
Toe-In (2)
Front0.12 (3)0 To 0.24 (0 To 5.5)
Rear0.25 (6.5)0 To 0.5 (0 To 12.5)
1999 Grand Cherokee (Up Country Suspension)
Camber (1)
Front(3)0.5 To 0
Rear(3)0.5 To 0
Caster(3)5.5 To 7.5
Toe-In (1)
Front0.240 To 0.48
Rear00 To 0.5
Toe-In (2)
Front0.12 (3)0 To 0.24 (0 To 5.5)
Rear0.25 (6.5)0 To 0.5 (0 To 12.5)
Wrangler
Camber (1)0.250.88 To 0.38
Caster (1)76.00 To 8.00
Toe-In (1)0.30.00 To 0.6
Toe-In (2)0.15 (4)0.00 To 0.3 (0 To 7.5)
(1) Measurement in degrees. (2) Measurement in inches (mm). (3) Information is not available from manufacturer.
(1)Measurement in degrees.
(2)Measurement in inches (mm).
(3)Information is not available from manufacturer.

WHEEL ALIGNMENT SPECIFICATIONS