TRANSMISSION OVERDRIVE SOLENOID & TRANSMISSION TORQUE CONVERTER CLUTCH (TCC) SOLENOID
Note. Transmission overdrive solenoid may also be referred to as overdrive solenoid or 3-4 shift solenoid.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| CKP Sensor Bolt/Nut |
| 2.5L | 14 (19) |
| 4.0L | (1) |
| 4.7L | 21 (28) |
| Distributor Hold-Down Bolt | 17 (23) |
| Fuel Pump Module Lock Nut |
| Cherokee & Grand Cherokee | 55 (74) |
| Wrangler | 45 (62) |
| Fuel Tank Skid Plate (Wrangler) | 12 (16) |
| HO2S | 22 (30) |
| IAT Sensor | 20 (28) |
| Ignition Coil | (2) |
| P/N Switch | 25 (34) |
| PSP Switch | 10-16 (14-22) |
| INCH Lbs. (N.m) |
| Air Cleaner Housing Bolt/Nut |
| Cherokee | 71 (8.0) |
| Grand Cherokee | 93 (10.0) |
| ECT Sensor | 96 (11.0) |
| Fuel Tank Strap Nuts (Cherokee) | 90 (10) |
| Fuel Rail Bolt | 100 (11) |
| IAC Motor | 60 (6.8) |
| MAP Sensor | 25 (3.0) |
| Throttle Body Bolts |
| Cherokee | 100 (11) |
| Grand Cherokee |
| 4.0L | 100 (11) |
| 4.7L | 105 (12) |
| Wrangler | 105 (12) |
| TP Sensor Bolt | 60 (6.8) |
| VSS Bolt | 20 (2.3) |
| (1) 60 INCH lbs. (6.8 N.m). (2) If using tapped bolts, tighten to 50 INCH lbs. (6.5 N.m). If using standard bolts/nuts, tighten to 100 INCH lbs. (11.0 N.m). |
| (1) | 60 INCH lbs. (6.8 N.m). |
| (2) | If using tapped bolts, tighten to 50 INCH lbs. (6.5 N.m). If using standard bolts/nuts, tighten to 100 INCH lbs. (11.0 N.m). |
