Home ReviewsRefund
Home/Jeep/Cherokee/Jeep Cherokee II (1984-1996)/Repair manual/Testing & Diagnostics/Ignition System Tests - 4.0L: Overhaul
Contents Wiring diagrams Section: Testing & Diagnostics All sections

Ignition System Tests - 4.0L: Overhaul Jeep Cherokee II

Testing & Diagnostics

Reassembly

  1. Install stator assembly and the stator retaining screw.
  2. Position the stator assembly harness through the distributor housing and push the grommet into position.
  3. Install distributor shaft into the distributor housing. If the shaft is equipped with seals, ensure that they are in place and not damaged.
  4. Install the distributor gear washer and distributor gear onto the shaft.
  5. Install the distributor gear retaining pin.
  6. Install the distributor rotor.
  7. Install the distributor as specified in «DISTRIBUTOR R & I»(ref-24456-S30864040322001040200000) under REMOVAL & INSTALLATION above in this article.

More articles — Ignition System Tests - 4.0L