Home ReviewsRefund
Home/Jaguar/XKR/Jaguar XKR II рестайлинг 2 (2011-2014)/Repair manual/Starter/Pinpoint Test E: Engine Still Not Cranking: Removal & Insta…
Contents Section: Starter All sections

Pinpoint Test E: Engine Still Not Cranking: Removal & Installation Jaguar XKR II рестайлинг 2

Starter 6 illustrations ~108 words

REMOVAL

Note. Removal steps in this procedure may contain installation details.

Scheme 4

Scheme 4: REMOVAL
Scheme 4: REMOVAL

Scheme 5

Scheme 5
Scheme 5
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Refer to «Floor Console Finish Panel»(ref-574770-S14660733692013082800000) information.
  3. Torque: 6 Nm
  4. Torque: 2 Nm
  5. Torque: 2 Nm

INSTALLATION

  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 6

Scheme 6: REMOVAL
Scheme 6: REMOVAL

Scheme 7

Scheme 7
Scheme 7

Scheme 8

Scheme 8
Scheme 8

Scheme 9

Scheme 9
Scheme 9
  1. Refer to «BATTERY DISCONNECT AND CONNECT»(ref-574738-S14717774632013090500000) information.
  2. Raise and support the vehicle.
  3. Refer to «Air Deflector»(ref-574757-S24500562812013082800000) information.
  4. Torque: 6 Nm
  5. Torque: 12 Nm
  6. Torque: 12 Nm
  7. Torque: 48 Nm
  1. To install, reverse the removal procedure.

More articles — Pinpoint Test E: Engine Still Not Cranking