SPECIFICATIONS
| CAUTION | Do not use brake fluid ITT Super Dot 4 on 2006my vehicles onwards. Failure to follow this instruction may result in damage to the vehicle. |
Note. Brake fluid ITT Super Dot 4 has now been superseded by Shell ESL Super Dot 4 which is the Jaguar recommended brake fluid. Shell ESL Super Dot 4 can be used on all model years.
| Item | Specification |
|---|---|
| Brake fluid | Shell ESL Dot 4 |
LUBRICANTS, FLUIDS, SEALERS AND ADHESIVES
| Item | Specification |
|---|---|
| Front brake pad material nominal thickness | 13 mm (0.51 in) |
| Front brake pad material minimum thickness | 2 mm (0.08 in) |
| Rear brake pad material nominal thickness | 10.8 mm (0.43 in) |
| Rear brake pad material minimum thickness | 2 mm (0.08 in) |
| Front brake disc diameter - Vehicles with standard brakes | 355 mm (14.0 in) |
| Front brake disc diameter - Vehicles with high performance brakes | 380 mm (15.0 in) |
| New front brake disc nominal thickness - Vehicles with standard brakes | 32 mm (1.26 in) |
| New front brake disc nominal thickness - Vehicles with high performance brakes | 36 mm (1.42 in) |
| Worn front brake disc minimum thickness - Vehicles with standard brakes | 30 mm (1.18 in) |
| Worn front brake disc minimum thickness - Vehicles with high performance brakes | 34 mm (1.34 in) |
| Rear brake disc diameter - Vehicles with standard brakes | 326 mm (12.8 in) |
| Rear brake disc diameter - Vehicles with high performance brakes | 376 mm (14.8 in) |
| New rear brake disc nominal thickness - Vehicles with standard brakes | 20 mm (0.79 in) |
| New rear brake disc nominal thickness - Vehicles with high performance brakes | 26 mm (1.02 in) |
| Worn rear brake disc minimum thickness - Vehicles with standard brakes | 18 mm (0.72 in) |
| Worn rear brake disc minimum thickness - Vehicles with high performance brakes | 24 mm (0.94 in) |
| Maximum front brake disc runout (installed) | 0.09 mm (0.004 in) |
| Maximum rear brake disc runout (installed) | 0.075 mm (0.003 in) |
| Maximum front hub face runout (installed) | 0.015 mm (0.0006 in) |
| Maximum rear hub face runout (installed) | 0.05 mm (0.002 in) |
| Front brake sliding caliper single piston diameter - Vehicles with standard brakes | 60 mm (2.36 in) |
| Front brake sliding caliper double piston diameter - Vehicles with high performance brakes | 42 mm (1.66 in) |
| Rear brake sliding caliper single piston diameter | 45 mm (1.77 in) |
| Front brake caliper bleed screw | 14 Nm (10 lb-ft) |
| Rear brake caliper bleed screw | 14 Nm (10 lb-ft) |
BRAKE LINING AND DISC SPECIFICATIONS