Home/Jaguar/XK/Jaguar XK II рестайлинг 2 (2011-2014)/Repair manual/Engine Control Systems/Electronic Engine Controls (V8 5.0L Petrol): Removal & Inst…
Contents Section: Engine Control Systems All sections

Electronic Engine Controls (V8 5.0L Petrol): Removal & Installation Jaguar XK II рестайлинг 2

Engine Control Systems 33 illustrations ~943 words

REMOVAL

Note. Removal steps in this procedure may contain installation details.

Scheme 4

Scheme 4: REMOVAL
  1. Raise and support the vehicle.
  2. Refer to «Thermostat Housing - Vehicles With: Supercharger»(ref-574755-S13806084622013082800000) information.
  3. Refer to «Thermostat Housing - Vehicles Without: Supercharger»(ref-574755-S26607089492013082800000) information.
  4. Torque: 10 Nm

INSTALLATION

  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 5

Scheme 5: REMOVAL
  1. Raise and support the vehicle.
  2. Refer to «Thermostat Housing - Vehicles With: Supercharger»(ref-574755-S13806084622013082800000) information.
  3. Refer to «Thermostat Housing - Vehicles Without: Supercharger»(ref-574755-S26607089492013082800000) information.
  4. Torque: 10 Nm
  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 6

Scheme 6: REMOVAL

Scheme 7

Scheme 7

Scheme 8

Scheme 8

Scheme 9

Scheme 9
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Raise and support the vehicle.
  3. Refer to «Air Deflector»(ref-574757-S24500562812013082800000) information.
  4. Torque: 48 Nm
  1. To install, reverse the removal procedure.
  2. If required, carry out a long drive cycle. Refer to «Powertrain Control Module (PCM) Long Drive Cycle Self-Test»(ref-574742-S11669450882013082800000) information.

Note. Removal steps in this procedure may contain installation details.

Scheme 10

Scheme 10: REMOVAL

Scheme 11

Scheme 11

Scheme 12

Scheme 12
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Raise and support the vehicle.
  3. Refer to «Air Deflector»(ref-574757-S24500562812013082800000) information.
  4. Torque: 48 Nm
  1. To install, reverse the removal procedure.
  2. If required, carry out a long drive cycle. Refer to «Powertrain Control Module (PCM) Long Drive Cycle Self-Test»(ref-574742-S11669450882013082800000) information.

Note. Removal steps in this procedure may contain installation details.

Scheme 13

Scheme 13: REMOVAL
  1. Raise and support the vehicle.
  2. Refer to «Air Deflector - 5.0L»(ref-574757-S24500562812013082800000) information.
  3. Torque: 10 Nm
  1. To install, reverse the removal procedure.

Scheme 14

Scheme 14: REMOVAL

Scheme 15

Scheme 15

Scheme 16

Scheme 16

Scheme 17

Scheme 17

Scheme 18

Scheme 18
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Torque: 10 Nm
  3. Torque: 10 Nm
  4. Torque: 6 Nm
  5. Torque: 7 Nm
  6. Torque: 9 Nm
  1. To install, reverse the removal procedure.
  2. Configure the engine control module (ECM) using the diagnostic tool.

Note. Removal steps in this procedure may contain installation details.

Scheme 19

Scheme 19: REMOVAL
  1. Raise and support the vehicle.
  2. Refer to «Engine Cover - 5.0L»(ref-574758-S40327427642013082800000) information.
  3. Refer to «Cooling System Draining and Vacuum Filling - Vehicles Without: Supercharger»(ref-574753) information.
  4. Lift the tang and rotate the engine coolant temperature (ECT) sensor counter-clockwise.
  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 20

Scheme 20: REMOVAL
  1. Raise and support the vehicle.
  2. Refer to «Air Deflector - 5.0L»(ref-574757-S24500562812013082800000) information.
  3. Refer to «Engine Oil Draining And Filling»(ref-574813-S16825333452013090500000) information.
  4. Torque: 11 Nm
  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 21

Scheme 21: REMOVAL
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Refer to «Intake Manifold»(ref-574813-S38982370162013082800000) information.
  3. Torque: 20 Nm
  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 22

Scheme 22: REMOVAL
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Refer to «Intake Manifold»(ref-574813-S38982370162013082800000) information.
  3. Torque: 20 Nm
  1. To install, reverse the removal procedure.
WARNINGRefer to Petrol and Petrol-Ethanol Fuel Systems Health and Safety Precautions information.

Note. Removal steps in this procedure may contain installation details.

Scheme 23

Scheme 23
  1. Refer to «Fuel System Pressure Release - 5.0L»(ref-574818) information.
  2. Refer to «Engine Cover - 5.0L»(ref-574758-S40327427642013082800000) information.
  3. Torque: 32 Nm
  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 24

Scheme 24: REMOVAL

Scheme 25

Scheme 25

Scheme 26

Scheme 26
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Raise and support the vehicle.
  3. Refer to «Air Deflector»(ref-574757-S24500562812013082800000) information.
  4. Refer to «Catalytic Converter»(ref-574752-S38121216962013082800000) information.
  5. Wrench, H02S (310-121) Torque: 48
  1. To install, reverse the removal procedure.
  2. If required, carry out a long drive cycle. Refer to «Powertrain Control Module (PCM) Long Drive Cycle Self-Test»(ref-574742-S11669450882013082800000) information.

Note. Removal steps in this procedure may contain installation details.

Scheme 27

Scheme 27: REMOVAL

Scheme 28

Scheme 28

Scheme 29

Scheme 29
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Raise and support the vehicle.
  3. Refer to «Air Deflector»(ref-574757-S24500562812013082800000) information.
  4. Refer to «Catalytic Converter RH»(ref-574752-S11143774572013082800000) information.
  5. Wrench, H02S (310-121) Torque: 48
  1. To install, reverse the removal procedure.
  2. If required, carry out a long drive cycle. Refer to «Powertrain Control Module (PCM) Long Drive Cycle Self-Test»(ref-574742-S11669450882013082800000) information.

Note. Removal steps in this procedure may contain installation details.

Scheme 30

Scheme 30: REMOVAL
  1. Refer to «Engine Cover - 5.0L»(ref-574758-S40327427642013082800000) information.
  2. Torque: 5 Nm
  1. To install, reverse the removal procedure.
  2. If required, carry out a short drive cycle. Refer to «Powertrain Control Module (PCM) Short Drive Cycle Self-Test»(ref-574742-S17833187932013082800000) information.

Note. Removal steps in this procedure may contain installation details.

Scheme 31

Scheme 31: REMOVAL
  1. Raise and support the vehicle.
  2. Refer to «Air Cleaner RH»(ref-574754-S32627938112013082800000) information.
  1. To install, reverse the removal procedure.
  2. If required, carry out a short drive cycle. Refer to «Powertrain Control Module (PCM) Short Drive Cycle Self-Test»(ref-574742-S17833187932013082800000) information.

Note. Removal steps in this procedure may contain installation details.

Scheme 32

Scheme 32: REMOVAL
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Refer to «Intake Manifold»(ref-574813-S38982370162013082800000) information.
  3. Torque: 20 Nm
  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 33

Scheme 33: REMOVAL
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Refer to «Intake Manifold»(ref-574813-S38982370162013082800000) information.
  3. Torque: 20 Nm
  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 34

Scheme 34: REMOVAL

Scheme 35

Scheme 35
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Raise and support the vehicle.
  3. Refer to «Thermostat Housing - Vehicles With: Supercharger»(ref-574755-S13806084622013082800000) information.
  4. Refer to «Thermostat Housing - Vehicles Without: Supercharger»(ref-574755-S26607089492013082800000) information.
  5. Torque: 10 Nm
  1. To install, reverse the removal procedure.
  2. If required, carry out a short drive cycle. Refer to «Powertrain Control Module (PCM) Short Drive Cycle Self-Test»(ref-574742-S17833187932013082800000) information.

Note. Removal steps in this procedure may contain installation details.

Scheme 36

Scheme 36: REMOVAL
  1. Refer to «Battery Disconnect and Connect»(ref-574738) information.
  2. Raise and support the vehicle.
  3. Refer to «Thermostat Housing - Vehicles With: Supercharger»(ref-574755-S13806084622013082800000) information.
  4. Refer to «Thermostat Housing - Vehicles Without: Supercharger»(ref-574755-S26607089492013082800000) information.
  5. Torque: 10 Nm
  1. To install, reverse the removal procedure.
  2. If required, carry out a short drive cycle. Refer to «Powertrain Control Module (PCM) Short Drive Cycle Self-Test»(ref-574742-S17833187932013082800000) information.