Home/Jaguar/XJS/Jaguar XJS Series 3 (1990-1996)/Repair manual/Procedures/Maintenance Information: Specifications
Contents Wiring diagrams Section: Procedures All sections

Maintenance Information: Specifications Jaguar XJS Series 3

TIRE SPECIFICATIONS

CAUTIONDO NOT mix tires of different design, such as steel belted radials with radial bias belted or bias ply tires. Mixing tire types will adversely affect road handling and may lead to loss of vehicle control. It is also recommended that tires of the same make be used on all four wheels, as tires of same size and type of different make vary widely in characteristics. Snow chains may be fitted on rear wheels only and tension must be adjusted correctly.

WHEEL & TIRE SPECIFICATIONS

Wheel TypeFt. Lbs. (N.m.)
Steel48-63 (65-85)
Alloy65-75 (88-102)

WHEEL TORQUE SPECIFICATIONS

BATTERY SPECIFICATIONS

CAUTIONWhen battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION Section.

Check electrolyte fluid in battery regularly to ensure adequate fluid level. These models use a type 440 battery. On the type 440 battery, electrolyte level should be 4-6 mm above the separator plates. Remove cell covers and fill each battery cell to the correct level as necessary with distilled water. DO NOT overfill battery.