XJR, XJ6 & XK8
Before adjusting alignment, check riding height. Press down on front bumper to depress car, and slowly release. Bounce vehicle several times, and allow suspension to settle. Ensure vehicle has a full tank of fuel and correct fluid levels. Ensure tire inflation is correct.
| Application | Front In. (mm) | Rear In. (mm) |
|---|---|---|
| XJR, XJ6 & XK8 | (1) 5.8-6.2 (148-158) | 6.1-6.5 (155-165) |
| (1) Measure from level floor to underside of crossmember. | ||
| (1) | Measure from level floor to underside of crossmember. |
RIDING HEIGHT SPECIFICATIONS
FRAME & UNDERBODY
Using a floor jack under crossmember, raise front of car. DO NOT place jack under aluminum suspension crossmember. Support with stands. Raise rear of vehicle at rear crossmember, using a block of wood between jack and crossmember.
OUTERBODY
Raise vehicle using any of 4 lifting pads positioned around vehicle.