- Open the engine compartment hood to service position and install body protection covers.
- Drain the cooling system. See «COOLING SYSTEM»(ref-49508-S07314921572004012800000). Retain the coolant drain tray in position to catch any spillage when removing the thermostat cover.
- Loosen and reposition the lower hose clamp. Remove the lower hose from the thermostat cover. (Схема №189)
- Remove the 3 thermostat cover bolts and remove the thermostat cover from the outlet pipe. Remove the thermostat and the seal from the outlet pipe. Discard the seal. (Схема №190)
Contents
Wiring diagrams Section: Mechanical- Intake Manifold (Non-Supercharged): Overview
- Intake Manifold (Non-Supercharged): Removal & Installation
- Abbreviations
- Accessory Drive Belts
- Adjustments
- Airbag
- Anti-Lock/traction Control
- Application
- Automatic HVAC System
- Automatic Trans
- Auxiliary Emission Control Systems
- Axle Shafts
- Basic Trouble Shooting
- Brakes
- Cabin Air Filter
- Charging System
- Check Lists
- Computer Relearn
- Cooling Fan
- Cruise Control Systems
- Diagnostic Connector Locations
- Differentials & Drive Axles
- Door Locks & Anti-Theft Systems
- Driveline/axles
- DTC Index
- Electrical Component Locations
- Emission Applications
- Engine
- Engine Performance
- Fuses & Circuit Breakers
- Gauges & Instrument Panels
- General Servicing - All Makes
- Heated Glass/defoggers
- Identification
- Manual & Power Steering
- Mechanical
- Mechanical - Hydraulic
- Metric Conversions
- Mirrors
- Mode 6
- Oem General Information
- Pin Voltage Charts
- Removal & Installation
- Reset Procedures
- Restraints
- Sensor Range Charts
- Specifications
- Starter
- Steering
- Steering Column
- Steering Column Switches
- Sun Roof/t-Top/convertible Top
- Suspension Rear
- Testing & Diagnostics
- Theory & Operation
- Traction Control Disable
- Transmission
- Wheel Alignment
- Wheel Hubs
- Windows
- Wiper/washer Systems