SPECIFICATIONS
Lubricants, Fluids, Sealers and Adhesives
| Description | Specification |
|---|---|
| Air conditioning (A/C) refrigerant | HFC 134a |
| A/C compressor oil | ND-OIL8 or Sanden SP10 |
Capacities
| Description | Grammes |
|---|---|
| A/C refrigerant - all vehicles | 700 |
Refrigerant Oil Adding Capacities
Note. Rotate the A/C compressor shaft at least 6 to 8 turns when draining the refrigerant oil.
| Item | Milliliters |
|---|---|
| A/C condenser core | Add 33 |
| A/C evaporator | Add 46 |
| A/C compressor | 1. Drain old A/C compressor. With drain plug removed and ports uncapped, rotate shaft to remove A/C compressor oil and measure the amount of oil captured. 2. Drain new A/C compressor into a clean vessel. With drain plug removed and ports uncapped, rotate shaft to remove oil. Then add back a quantity of the new oil that is identical to the quantity of oil removed from the old A/C compressor. However, if this quantity is less than 30ml, then make it up to 30ml. |
| A/C lines - if air conditioning has been operational. | Add 10 per A/C line |
| A/C system after flushing - with compressor included | Add 110 |
| A/C system after flushing - without a new compressor installed - remaining A/C compressor oil is to be drained | Add 110 |
| A/C system after flushing - with a new compressor installed - A/C compressor supplied with 110ml |