Home ReviewsRefund
Home/Jaguar/XF/Jaguar XF I (2007-2011)/Repair manual/Collision/avoidance/Pedestrian Protection System: Removal & Installation
Contents Wiring diagrams Section: Collision/avoidance All sections

Pedestrian Protection System: Removal & Installation Jaguar XF I

Collision/avoidance 4 illustrations ~151 words

REMOVAL

Note. Removal steps in this procedure may contain installation details.

  1. Refer to «Front Bumper Cover»(ref-568442-S31733499332013072200000) information.
  2. Torque: 3 Nm

INSTALLATION

  1. To install, reverse the removal procedure.

Note. Removal steps in this procedure may contain installation details.

Scheme 1

Scheme 1: REMOVAL
Scheme 1: REMOVAL
  1. Disconnect the battery ground cable. Refer to «Battery Disconnect and Connect»(ref-568400-S03532047432013072200000) information.
  2. Remove the cowl vent screen. Refer to «Cowl Vent Screen»(ref-568406-S32289223332013072200000) information.
  3. Torque: 8 Nm
  1. Install is the reverse of removal.

Note. Removal steps in this procedure may contain installation details.

  1. Disconnect the battery ground cable. Refer to «Battery Disconnect and Connect»(ref-568400-S03532047432013072200000) information.
  2. Remove the cowl vent screen. Refer to «Cowl Vent Screen»(ref-568406-S32289223332013072200000) information.
  3. Torque: 8 Nm
  1. Install is the reverse of removal.

Note. Removal steps in this procedure may contain installation details.

Scheme 2

Scheme 2: REMOVAL
Scheme 2: REMOVAL

Scheme 3

Scheme 3
Scheme 3

Scheme 4

Scheme 4
Scheme 4
  1. Refer to «Battery Disconnect and Connect»(ref-568400-S03532047432013072200000) information.
  2. Torque: 10 Nm
  1. To install, reverse the removal procedure.

More articles — Pedestrian Protection System