Module Configuration: Other Jaguar X-type I рестайлинг

Inhale/exhale procedure

For all modules, except diesel engine control module

1. Install the new module
2. Upload the information from the VID block using the Jaguar approved diagnostic system
3. Download the information to the VID block using the Jaguar approved diagnostic system

For diesel engine control module

1. Upload the information from the VID block using the Jaguar approved diagnostic system
2. Install the new module
3. Download the information to the VID block using the Jaguar approved diagnostic system

Note. The Jaguar approved diagnostic system will not retain the stored configuration information for longer than 24 hours.

For additional information on the IC, Refer to Instrument Cluster article. For additional information on the ECM, Refer to Electronic Engine Controls article. For additional information on the HID, Refer to Exterior Lighting article. For additional information on the ISM, Refer to Anti-Theft - Active article. For additional information on the phone module, Refer to Cellular Phone article. For additional information on the TCM, Refer to Transmission Description article. For additional information on the voice module, Refer to Cellular Phone article. For additional information on the GEM, Refer to Module Controlled Functions article. For additional information on the EATC, Refer to Climate Control System article. For additional information on the airbag control module, Refer to Air Bag Supplemental Restraint System (SRS) article.

Customer Driven Preferences

The second type of configuration data is customer preference driven. These are items that the customer may or may not want to have enabled. Typically, customer preference items can be toggled on or off by the use of the Jaguar approved diagnostic system.

To carry out the customer configuration process, select the option the customer wants enabled or disabled from the configuration menu.

The current status of each option will be displayed, and the options can be enabled or disabled from this menu by following the instructions on-screen.

1. The complexity of the electronics involved with module configuration, of which the GEM and instrument cluster are a part, and the multiplexed communication network which are connected to them preclude the use of workshop general electrical test equipment. Therefore, reference should be made to the Jaguar Approved Diagnostic System User Guide for detailed instructions on module configuration.