Specifications
| CAUTION | Do not use brake fluid ITT Super Dot 4 on 2006my vehicles onwards. Failure to follow this instruction may result in damage to the vehicle. |
Note. Brake fluid ITT Super Dot 4 has now been superseded by Shell ESL Super Dot 4 which is the Jaguar recommended brake fluid. Shell ESL Super Dot 4 can be used on all model years.
| Item | Specification |
|---|---|
| Brake fluid | ITT Super Dot 4 |
| Brake fluid | Shell ESL Super Dot 4 |
| Caliper slide pin grease | Klueber GLK1 |
Lubricants, Fluids, Sealers and Adhesives
| Item | Specification |
|---|---|
| Brake pad nominal thickness - front | 10.4 mm (0.40 in) |
| Brake pad minimum thickness - front | 2 mm (0.08 in) |
| Brake pad nominal thickness - rear | 11.80 mm (0.43 in) |
| Brake pad minimum thickness - rear | 2 mm (0.08 in) |
| Brake disc diameter - front | 300 mm (12 in) |
| Brake disc diameter - rear | 280 mm (11.032 in) |
| New disc nominal thickness - front | 24 mm (0.95 in) |
| New disc nominal thickness - rear | 12 mm (0.47 in) |
| Worn disc discard thickness - front | 22.2 mm (0.87 in) |
| Worn disc discard thickness - rear | 10.2 mm (0.40 in) |
| Maximum disc runout (installed) - front | 0.076 mm (0.003 in) |
| Maximum hub face runout (installed) - front | 0.05 mm (0.002 in) |
| Maximum disc runout (installed) - rear | 0.076 mm (0.003 in) |
| Maximum hub face runout (installed) - rear | 0.05 mm (0.002 in) |
| Maximum thickness variation - new disc - front | 0.009 mm (0.0004 in) in 360° |
| Maximum thickness variation - new disc - rear | 0.009 mm (0.0004 in) in 360° |
| Caliper piston diameter - single piston - front | 57 mm (2.24 in) |
| Caliper piston diameter - rear | 38 mm (1.49 in) |
Brake Lining and Disc Specifications
See also:
• Lifting