Scheme 1
Scheme 1: Control Components - Description & Operation
| Item Number | Description |
| 1 | Air inlet blend door actuator |
| 2 | Air discharge temperature sensor |
| 3 | Defrost vent/register blend door actuator |
| 4 | Temperature blend door actuator |
| 5 | Footwell vent/duct blend door actuator |
Scheme 2
| Item Number | Description |
| 1 | Touch screen switch |
| 2 | Recirculated air switch |
| 3 | Increase set temperature switch |
| 4 | Decrease set temperature switch |
| 5 | Temperature/clock display |
| 6 | Automatic operation switch |
| 7 | Fan speed switch |
| 8 | Climate control select switch |
Scheme 3
| Item Number | Description |
| 1 | Fan speed and ON/OFF switch |
| 2 | Recirculated air switch |
| 3 | Screen display |
| 4 | Celsius/Fahrenheit select switch |
| 5 | Automatic operation switch |
| 6 | Air distribution switches |
| 7 | Increase set temperature switch |
| 8 | Decrease set temperature switch |
Scheme 4
| Item Number | Description |
| 1 | Climate control assembly |
Scheme 5
| Item Number | Description |
| 1 | Sunload sensor |
This vehicle is fitted with one of the following climate control systems
- manual climate control
- automatic climate control with a liquid crystal display (LCD) screen
- automatic climate control with a touch screen
Each system has a unique control panel located in the center console above the radio and audio controls.
For additional information, refer to Climate Control System - General Information article.
Scheme 6
Scheme 7
Scheme 8
- Remove the lower vent. Detach the bulb holder. Remove the lower vent.
- Disconnect the air discharge temperature sensor electrical connector.
- Remove the air discharge temperature sensor.