Home ReviewsRefund
Home/Jaguar/X-type/Jaguar X-type I (2001-2009)/Repair manual/Seats/Seating: Diagnosis
Contents Wiring diagrams Section: Seats All sections

Seating: Diagnosis Jaguar X-type I

Seats ~392 words

Visual Inspection Chart

MechanicalElectrical
Seat base Seat backrest Seat track(s) Lumbar assembly bagFuse(s) Wiring harness Electrical connector(s) Motor(s) Switch(es) Heated seat module Lumbar assembly pump

VISUAL INSPECTION CHART

  1. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  2. If the concern is not visually evident, verify the symptom and refer to the «SYMPTOM CHART»(ref-209497-S15944319112005120900000) .

Symptom Chart

The power seat is inoperative - high specification seat only

Possible Source(s)

  1. Seat control switch. Action(s) to take: CARRY OUT the Seat Control Switch Component Test. REFER to the .

Possible Source(s)

  1. Circuit(s).
  2. Motor(s). Action(s) to take: GO to Pinpoint Test «A: THE POWER SEAT IS INOPERATIVE - HIGH SPECIFICATION SEAT»(ref-209497-S03871866052005120900000) A. The power seat is inoperative - low specification seat only

Possible Source(s)

  1. Seat control switch. Action(s) to take: CARRY OUT the Seat Control Switch Component Test. REFER to the .

Possible Source(s)

  1. Circuit(s).
  2. Motor(s). Action(s) to take: GO to Pinpoint Test «B: THE POWER SEAT IS INOPERATIVE - LOW SPECIFICATION SEAT ONLY»(ref-209497-S24711352802005120900000) B. The power seat does not move horizontally - high specification seat only

Possible Source(s)

  1. Seat control switch. Action(s) to take: CARRY OUT the Seat Control Switch Component Test. REFER to the .

Possible Source(s)

  1. Circuit(s).
  2. Motor(s). Action(s) to take: GO to Pinpoint Test «C: THE POWER SEAT DOES NOT MOVE HORIZONTALLY»(ref-209497-S30468244892005120900000) C. The power seat does not move vertically - high specification seat only

Possible Source(s)

  1. Seat control switch. Action(s) to take: CARRY OUT the Seat Control Switch Component Test. REFER to the .

Possible Source(s)

  1. Circuit(s).
  2. Motor(s). Action(s) to take: GO to Pinpoint Test «D: THE POWER SEAT DOES NOT MOVE VERTICALLY - HIGH SPECIFICATION SEAT»(ref-209497-S07760974512005120900000) D. The power seat does not recline - high specification seat only

Possible Source(s)

  1. Seat control switch. Action(s) to take: CARRY OUT the Seat Control Switch Component Test. REFER to the .

Possible Source(s)

  1. Circuit(s).
  2. Motor(s). Action(s) to take: GO to Pinpoint Test «E: THE POWER SEAT DOES NOT RECLINE - HIGH SPECIFICATION SEAT ONLY»(ref-209497-S23468525522005120900000) E. The power lumbar is inoperative - high specification seat only

Possible Source(s)

  1. Seat control switch. Action(s) to take: CARRY OUT the Seat Control Switch Component Test. REFER to the .

Possible Source(s)

  1. Lumbar assembly bag Action(s) to take: INSPECT the seat lumbar assembly bag. INSTALL a new lumbar assembly as necessary. For additional information, refer to.

Possible Source(s)

  1. Circuit(s).
  2. Motor(s). Action(s) to take: GO to Pinpoint Test «F: THE POWER LUMBAR IS INOPERATIVE»(ref-209497-S36362014242005120900000) F.

More articles — Seating