Cellular Phone: Other Jaguar X-type I

System/Carrier Concerns - All Systems

Dropped calls, bad connections, noisy audio and other intermittent symptoms usually indicate a system or cellular carrier concern, and are not the fault of the phone itself. Such symptoms may occur in situations such as the following

1. In certain geographic areas (for example: areas of excessive foliage or hills) or at the edge of coverage areas.
2. At the same place each day.
3. At the same time each day.
4. Under bridges, tunnels, in lower freeways, or in congested downtown areas.

If the customer phone exhibits any of the above symptoms or symptoms occur under the above conditions, the customer or the dealer should contact customer assistance at their particular cellular provider/carrier or call the assistance number provided in the Jaguar Cellular System Dealer kit.

Other Possible Concerns - All Systems

1. If, for some reason, the customer's electronic serial number was incorrectly recorded in the carrier switch, the phone will not work. Call the assistance number provided in the Jaguar Cellular System Dealer kit to check the electronic serial number CDMA/TDMA only.
2. A customer initial call must be made in his/her home coverage area for correct activation of the Jaguar Cellular System.
3. A customer may have to wait until after 24 hours of the coverage activation before making a call from outside of his/her home coverage area or the phone might be reported stolen and coverage stopped.
4. There may be a slight delay in activation after leaving the dealership from initial delivery. If, after checking these possibilities, the phone still does not function, do not attempt to repair the phone. Call the cellular phone distributor.

All vehicles

1. Remove the floor console For additional information, refer to FLOOR CONSOLE ( )
2. Disconnect the cellular phone electrical connector.

Scheme 75

Scheme 76

Scheme 77

1. Remove the cellular phone.
2. Remove the handset holder. Detach the handset holder. Remove the handset holder.
3. Remove the armrest.

Scheme 78

Scheme 79

Scheme 80

1. Remove the armrest.
2. Remove the non slip mat.
3. Remove the handset hang up cup.

Scheme 81

Scheme 82

Scheme 83

1. Install the handset hang up cup.
2. Install the non slip mat.
3. Install the armrest.

Scheme 84

Scheme 85

Scheme 86

1. Install the armrest.
2. Attach the handset holder. Install the handset holder. Attach the handset holder.
3. Install the cellular phone.

1. Connect the cellular phone electrical connector.
2. Install the floor console For additional information, refer to FLOOR CONSOLE ( )

Scheme 87

1. Remove the compact disc (CD) changer For additional information, refer to COMPACT DISC (CD) CHANGER - 4-DOOR ( )
2. Remove the module.

Scheme 88

1. To install, reverse the removal procedure. Tighten to 5 N.m.

Scheme 89

1. Disconnect the battery ground cable For additional information, refer to ( )
2. Remove the compact disc changer For additional information, refer to COMPACT DISC (CD) CHANGER - WAGON ( )
3. Remove the multifunction voice activated module For additional information, refer to MULTIFUNCTION VOICE ACTIVATED MODULE - WAGON ( )
4. Remove the module.

Scheme 90

1. To install, reverse the removal procedure. Tighten to 5 N.m.
2. Connect the battery ground cable For additional information, refer to