Torque Specifications
| Description | N.m |
|---|---|
| Driveshaft center bearing retaining bolts | 25 |
| Driveshaft front universal joint retaining bolts | 44 |
| Driveshaft rear universal joint retaining bolts | 44 |
TORQUE SPECIFICATIONS
- For additional information, refer to the approved .
Scheme 1
| WARNING | Under no circumstances must a 2004.25 MY or earlier driveshaft assembly be fitted to a later vehicle. Failure to follow this instruction may result in personal injury. |
| CAUTION | To preserve 'drive line' refinement, individual parts, other than fixings, MUST NOT be renewed. In the event of any balance or driveshaft component related concern, the complete assembly must be renewed. Under no circumstances may the universal joint be removed from the driveshaft (or its fixings be loosened). Do not drop or subject the driveshaft to damage. |
Note. 2004.25 MY driveshaft assemblies may be fitted to earlier model year vehicles. For modification details refer to in this section. For additional information, refer to DRIVESHAFT ( , undefined).
Note. All driveshaft assemblies are balanced. If undercoating the vehicle, protect the driveshaft, universal joints and the drive half shafts to prevent over-spray of the undercoating material.
The driveshaft consists of the following
- A two piece welded steel tube.
- A center bearing.
- Two universal joints.