Glass, Frames and Mechanisms: Other Jaguar S-type I рестайлинг

Door Window Motor Initialization - General Procedures

1. Operate the window control switch until the door window glass is in the fully closed position, continue to operate the window control switch for a further two seconds.
2. Release the window control switch.
3. Operate the window control switch in the closed position and continue to operate the window control switch for a further two seconds.
4. Operate the window control switch until the door window glass is in the fully open position ("one-touch" down).
5. Operate the window control switch once to the close position.
6. Repeat the door window motor initialization for each door window motor.

Scheme 69

Scheme 70

Scheme 71

Scheme 72

Scheme 73

1. Lower the front door window glass approximately 290 mm (11.6 in).
2. Remove the front door trim panel. Refer to «Interior Trim and Ornamentation»(ref-311279) .
3. Remove the front door interior weatherstrip.
4. Disconnect the front door exterior mirror electrical connector.
5. Detach the front door speaker module.
6. Remove the front door window glass.