Home/Isuzu/Rodeo/Isuzu Rodeo II (1998-2004)/Repair manual/Removal & Installation/Engine Controls - Removal, Overhaul & Installation: Specifi…
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Removal, Overhaul & Installation: Specifications Isuzu Rodeo II

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
2.2L
Crankshaft Pulley Bolts15 (20)
Oxygen Sensor41 (55)
EGR Valve Assembly10 (14)
3.2L & 3.5L
Coolant Pipe Rear Mounting Bolt12 (16)
Engine Coolant Temperature Sensor22 (30)
EGR Valve Assembly
Trooper 3.5L & Rodeo 3.2L18 (25)
VehiCROSS 3.5L21 (28)
Fuel Rail Bolts18 (25)
Fuel Tank Drain Plug
Trooper15 (20)
VehiCROSS21 (29)
Fuel Tank Undercover Retaining Bolts27 (36)
Knock Sensor (3.5L)15 (20)
Lower Intake Manifold Nuts & Bolts18 (25)
Oxygen Sensor41 (55)
Throttle Body Bolts10 (14)
Upper Intake Manifold (Plenum) Nuts & Bolts18 (25)
INCH Lbs. (N.m)
2.2L
Crankshaft Position Sensor Bolts80 (9)
Fuel Pressure Regulator Screws58 (6.5)
Fuel Rail Bolts62 (7)
Idle Air Control Valve9 (1)
3.2L & 3.5L
Camshaft Position Sensor Bolts80 (9)
Crankshaft Position Sensor Bolts80 (9)
Idle Air Control Valve9 (1)
3.5L
Fuel Pressure Regulator Attaching Screw27 (3)
Fuel Rail Bolts72 (8)

TORQUE SPECIFICATIONS