Removal & Installation
On VehiCROSS, remove rear console assembly. Remove 4 retaining screws. On all other models, insert a thin, flat-blade screwdriver between switch bezel and mounting surface. Release bezel lock and remove power mirror switch assembly. Disconnect electrical connectors. Remove power mirror, defogger or mirror retract switch. To install, reverse removal procedure.
Remove mirror cover at top front of door, disconnect speaker connector (if equipped). Remove screws and power mirror. Unplug harness connector. To install, reverse removal procedure. When installing mirror, hold glass run lip between door mirror base and center sash. (Scheme 1) Tighten bolts to 69 INCH lbs. (8 N.m).
