Home ReviewsRefund
Home/Isuzu/Axiom/Isuzu Axiom I (2001-2004)/Repair manual/Fuel System/Engine Speed Control System: Removal & Installation
Contents Wiring diagrams Section: Fuel System All sections

Engine Speed Control System: Removal & Installation Isuzu Axiom I

Fuel System

REMOVAL

  1. Disconnect battery ground cable.
  2. Disconnect Accelerator position (AP) sensor (1) connector from Accelerator pedal assembly.
  3. Remove Accelerator pedal assembly (2).

INSTALLATION

  1. Install Accelerator pedal assembly (2).
  2. Connect AP sensor (1) harness connector.
  3. Connect battery ground cable.

More articles — Engine Speed Control System