Home/Isuzu/Axiom/Isuzu Axiom I (2001-2004)/Repair manual/Automatic Trans/Transmission Control System: Specifications
Contents Wiring diagrams Section: Automatic Trans All sections

Transmission Control System: Specifications Isuzu Axiom I

TORQUE CONVERTER CLUTCH CONTROL (ELECTRONICALLY CONTROLLED CAPACITY CLUTCH = ECC

The clutch apply is controlled by moving the converter clutch valve by commanding Torque Converter Clutch (TCC) solenoid using the PWM signal.

TORQUE MANAGEMENT CONTROL

The transmission control side sends the absolute spark advance signal to the engine control side while the transmission is being shifted. This controls the engine spark timing in compliance with the vehicle running condition to reduce the shocks caused by the change of speed.

TRANSMISSION FLUID TEMPERATURE (TFT) SENSOR SPECIFICATIONS

TempTempMinimum ResistanceNominal ResistanceMaximum ResistanceSignal
°F°COhmOhmOhmVolts
40406005006642007311005.00
22303198003504003824004.65
4201774001927002086004.41
14101022001101001183004.00
3206087065110694503.52
50103741039750421202.98
68202366024980263002.40
86301527016120169701.85
104401004010660112901.43
122506758721176734.29
140604645498053244.04
158703255350637653.69
176802323251327103.34
194901685183119823.04
2121001242135514722.58
230110929101711092.24
2481207047738461.97
2661305405956531.67
2841404194645111.42
3021503293654031.16

TRANSMISSION FLUID TEMPERATURE (TFT) SENSOR SPECIFICATIONS

See also:
SELF-DIAGNOSTICS