Home ReviewsRefund
Home/Infiniti/QX80/Infiniti QX80 I (2013-2014)/Repair manual/Engine Control Systems/Accelerator Control System: Removal & Installation
Contents Wiring diagrams Section: Engine Control Systems All sections

Accelerator Control System: Removal & Installation Infiniti QX80 I

Engine Control Systems ~125 words

REMOVAL

  1. Remove the inside mounting nuts.
  2. Remove accelerator pedal assembly.
  3. Disconnect accelerator pedal position sensor harness connector. CAUTION: Never disassemble accelerator pedal assembly. Never remove accelerator pedal position sensor from accelerator pedal assembly. Avoid impact from dropping etc. during handling. Be careful to keep accelerator lever away from water.

INSTALLATION

Installation is the reverse order of removal.

  1. Remove the inside mounting nuts.
  2. Remove accelerator pedal assembly.
  3. Disconnect accelerator pedal actuator harness connector and accelerator pedal position sensor harness connector. CAUTION: Never disassemble accelerator pedal assembly. Never remove accelerator pedal position sensor from accelerator pedal assembly. Avoid impact from dropping etc. during handling. Be careful to keep accelerator pedal assembly away from water.

Installation is the reverse order of removal.

More articles — Accelerator Control System