APPLICATION ITEMS
CONSULT-III performs the following functions via the communication with the AV control unit.
| Diagnosis mode | Description |
|---|---|
| Ecu Identification | The part number of AV control unit can be checked. |
| Self Diagnostic Result | Performs a diagnosis on the AV control unit and a connection diagnosis for the communication circuit of the Multi AV system, and displays the current and past malfunctions collectively. |
| Data Monitor | The diagnosis of vehicle signal that is input to the AV control unit can be performed. |
| Work Support | Steering angle sensor can be adjusted. |
| Configuration | Read and save the vehicle specification. Write the vehicle specification when replacing AV control unit. |
CONFIGURATION REFERENCE
AV Communication
When "AV communication" of "CAN Diag Support Monitor" is selected, the following function will be performed.
| AV communication | AV&NAVI C/U | Displays the communication status from AV control unit to each unit as well as the error counter. |
|---|---|---|
| AUDIO | Displays the AV control unit communication status and the error counter. |
AV COMMUNICATION REFERENCE
CONSULT-III can display each diagnostic item using the diagnostic test modes shown as follows
| Test mode | Function |
|---|---|
| Ecu Identification | Sonar control unit part number can be read. |
| Self Diagnostic Result | Sonar control unit checks the conditions and displays memorized error. |
| Data Monitor | Sonar control unit input/output data in real time. |
| Active Test | Gives a drive signal to a load to check the operation. |
| Work support | Changes setting of each function. |
CONSULT-III FUNCTION