APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
| Diagnosis mode | Function Description |
|---|---|
| WORK SUPPORT | Changes the setting for each system function. |
| SELF-DIAG RESULTS | Displays the diagnosis results judged by BCM. Refer to " DTC INDEX ". |
| CAN DIAG SUPPORT MNTR | Monitors the reception status of CAN communication viewed from BCM. |
| DATA MONITOR | The BCM input/output signals are displayed. |
| ACTIVE TEST | The signals used to activate each device are forcibly supplied from BCM. |
| ECU IDENTIFICATION | The BCM part number is displayed. |
| CONFIGURATION | This function is not used even though it is displayed. |
CONSULT-III FUNCTION (BCM - COMMON ITEM)
SYSTEM APPLICATION
BCM can perform the following functions for each system.
Note. It can perform the diagnosis modes except the following for all sub system selection items.
| System | Sub system selection item | Diagnosis mode | ||
|---|---|---|---|---|
| WORK SUPPORT | DATA MONITOR | ACTIVE TEST | ||
| BCM | BCM | X | ||
| RAP system | RETAINED PWR | X | ||
SYSTEM REFERENCE