Home ReviewsRefund
Home/Infiniti/QX56/Infiniti QX56 I (2004-2007)/Repair manual/Driver Information System/SONAR CONTROL UNIT
Contents Wiring diagrams Section: Driver Information System All sections

SONAR CONTROL UNIT Infiniti QX56 I

Driver Information System 2 illustrations

SONAR CONTROL UNIT

  1. Remove luggage side finisher LH. Refer to " «LUGGAGE FLOOR TRIM»(ref-230060-S35781321602006042700000) " to gain access to sonar control unit.
  2. Disconnect electrical connector then remove sonar control unit. Refer to " «COMPONENT PARTS AND HARNESS CONNECTOR LOCATION»(ref-230067-S10938263152006042700000) ".
  3. Installation is in the reverse order of removal.

Scheme 107

Scheme 107: Wiring Diagram - CLOCK
Scheme 107: Wiring Diagram - CLOCK

Scheme 108

Scheme 108: REMOVAL
Scheme 108: REMOVAL
  1. Remove cluster lid C. Refer to " «INSTRUMENT PANEL ASSEMBLY»(ref-230061-S18128236702006042700000) ".
  2. Remove screws (3) and remove clock from cluster lid C.