Home ReviewsRefund
Home/Infiniti/QX50/Infiniti QX50 I (2013-2015)/Repair manual/Engine Control Systems/Accelerator Control System: Diagnosis
Contents Wiring diagrams Section: Engine Control Systems All sections

Accelerator Control System: Diagnosis Infiniti QX50 I

Engine Control Systems

INSPECTION AFTER INSTALLATION

  1. Check accelerator pedal moves smoothly within the whole operation range when it is fully depressed and released.
  2. Check accelerator pedal securely returns to the fully released position.
  3. For the electrical inspection of accelerator pedal position sensor, refer to " «DESCRIPTION»(/infiniti/qx50/i-2013-2015/remont/testing-diagnostics/#engine-control-system-diagnostic-codes-symptom-tests) ", " «DESCRIPTION»(/infiniti/qx50/i-2013-2015/remont/testing-diagnostics/#engine-control-system-diagnostic-codes-symptom-tests) " and " «DESCRIPTION»(/infiniti/qx50/i-2013-2015/remont/testing-diagnostics/#engine-control-system-diagnostic-codes-symptom-tests) ". CAUTION: When harness connector of accelerator pedal position sensor is disconnected, perform " «ACCELERATOR PEDAL RELEASED POSITION LEARNING»(ref-616999-S29656451112014052000000) ". Refer to " «ACCELERATOR PEDAL RELEASED POSITION LEARNING: DESCRIPTION»(ref-616999-S36605105562014052000000) ".

See also:
• DESCRIPTION

More articles — Accelerator Control System