Component Function Check Infiniti Q60 I

Component Function Check

1. CHECK OPERATION OF METER BUZZER Connect the CONSULT. Perform "LIGHT WARN ALM" in "ACTIVE TEST" of "BCM (BUZZER)". Does meter buzzer beep? YES: INSPECTION END NO: GO TO 2.
2. CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL Select the "Data Monitor" of "METER/M&A" and check the "BUZZER" monitor value. "BUZZER" Under the condition of buzzer input: On Except above: Off Is the inspection result normal? YES: Replace combination meter. NO: Replace BCM. Refer to " «REMOVAL AND INSTALLATION»(ref-660636-S18650734842014100600000) ".

1. CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL Connect the CONSULT. Select the "Data Monitor" of the "METER/M&A" and check the "BUCKLE SW" monitor value. "BUCKLE SW" When seat belt is fastened: Off When seat belt is unfastened: On >> INSPECTION END