| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 0 | 0.75 To 0.75 |
| Rear | 1 | 1.75 To 0.25 |
| Caster (1) |
| Front | 1.83 | 1.08 To 2.58 |
| Toe-In (2) |
| Front | 0.04 (1) | 0 To 0.08 (0 To 2) |
| Rear | 0 | 0.8 To 0.8 (-2 To 2) |
| Toe-In (1) |
| Front | .1 | 0 To 0.2 |
| Rear | 0 | 0.16 To 0.16 |
| Toe-Out On Turns (1) |
| Inner | 35 | 33 To 37 |
| Outer | 30 | 28 To 32 |
| SAI (1) | 14.5 | N/A |
| (1) Measurement in degrees. (2) Measurement in inches. |
| (1) | Measurement in degrees. |
| (2) | Measurement in inches. |
WHEEL ALIGNMENT SPECIFICATIONS (G20)
| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 0.17 | 0.58 To 0.92 |
| Rear | 0.37 | 1.08 To 0.33 |
| Caster (1) |
| Front | 4.67 | 3.92 To 5.42 |
| Toe-In (2) |
| Front | 0 | 0.4 To 0.4 (-1 To 1) |
| Rear | 0.09 (-2) | 0.18 To 0 (-4 To 0) |
| Toe-In (1) |
| Front | 0 | 0.08 To 0.08 |
| Rear | 0.18 | 0.36 To 0 |
| Toe-Out On Turns (1) |
| Inner | 42.5 | 40.5 To 44.5 |
| Outer | 33.5 | N/A |
| SAI (1) | 12.67 | N/A |
| (1) Measurement in degrees. (2) Measurement in inches. |
| (1) | Measurement in degrees. |
| (2) | Measurement in inches. |
WHEEL ALIGNMENT SPECIFICATIONS (M30)
| Application | Preferred | Range |
|---|
| With Active Suspension |
| Camber (1) |
| Front | 0.92 | 1.67 To -0.17 |
| Rear | 1.5 | 2 To -1 |
| Caster |
| Front (1) | 6.92 | 6.17 To 7.67 |
| Toe-In (2) |
| Front | 0 | 0.04 To 0.04 (-1 To 1) |
| Rear | 0.08 (2) | 0 To 0.16 (0 To 4) |
| Toe-In (1) |
| Front | 0 | 0.08 To 0.08 |
| Rear | 0.18 | 0 To 0.36 |
| Toe-Out On Turns (1) |
| Inner | 37 | 35 To 39 |
| Outer | 32 | N/A |
| SAI (1) | 12.92 | N/A |
| W/O Active Suspension |
| Camber (1) |
| Front | 0.83 | 1.58 To -0.08 |
| Rear | 1.08 | 1.58 To -0.58 |
| Caster (1) |
| Front | 6.5 | 5.75 To 7.25 |
| Toe-In (2) |
| Front | 0.04 (1) | 0 To 0.08 (0 To 2) |
| Rear | 0.08 (2) | 0 To 0.16 (0 To 4) |
| Toe-In (1) |
| Front | 0.08 | 0 To 0.16 |
| Rear | 0.18 | 0 To 0.36 |
| Toe-Out On Turns (1) |
| Inner | 37.5 | 35.5 To 39.5 |
| Outer | 32 | N/A |
| 12.75 | N/A |
| (1) Measurement in degrees. (2) Measurement in inches. |
| (1) | Measurement in degrees. |
| (2) | Measurement in inches. |
WHEEL ALIGNMENT SPECIFICATIONS (Q45)
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| G20 |
| Rear Toe-In Adjustment Pin | 80-94 (108-127) |
| Tie Rod Lock Nuts | 58-72 (78-98) |
| M30 |
| Rear Toe-In Adjustment Pin | 72-87 (98-118) |
| Tie Rod Lock Nuts | 58-72 (78-98) |
| Q45 |
| Rear Camber Adjustment Pin | 51-65 (69-88) |
| Rear Tie Rod Lock Nuts (Super HICAS) | 27-34 (37-46) |
| Rear Toe-In Adjustment Pin | 51-65 (69-88) |
| Tie Rod Lock Nuts | 58-72 (78-98) |
