SWITCH OPERATION Infiniti M35 III

SWITCH OPERATION

When any front door switch is ON (door is opened), ground is supplied

1. to step lamp (driver side, passenger side, rear LH and RH) terminals 2
2. to kicking plate illumination (driver side and passenger side) terminals 2
3. through BCM terminal 47.

And power is supplied

1. through BCM terminal 41
2. to step lamp (driver side, passenger side, rear LH and RH) terminals 1
3. to kicking plate illumination (driver side and passenger side) terminals 1.

When any door switch is ON (door is opened) and personal lamp and map lamp is DOOR position, ground is supplied

1. to personal lamp LH and RH terminal 1
2. to map lamp terminals 2 and 5
3. through BCM terminal 48.

And power is supplied

1. through BCM terminal 41
2. to personal lamp LH and RH terminals 3
3. to map lamp terminal 3.

When map lamp switch is ON, ground is supplied

1. to map lamp terminal 1
2. through grounds M16 and M70.

And power is supplied

1. through BCM terminal 41
2. to map lamp terminal 3.

When personal lamp LH and RH switch is ON, ground is supplied

1. to personal lamp LH and RH terminals 2
2. through grounds M16 and M70.

And power is supplied

1. through BCM terminal 41
2. to personal lamp LH and RH terminals 3.

When trunk lid lock assembly (trunk room lamp switch) is ON, ground is supplied

1. to trunk room lamp (upper and lower) terminals 2
2. through trunk lid lock assembly (trunk room lamp switch) terminals 1 and 2
3. through grounds B5, B40 and B131.

And power is supplied

1. through BCM terminal 41
2. to trunk room lamp (upper and lower) terminals 1.

When vanity mirror lamp LH and RH switch is ON, ground is supplied

1. to vanity mirror lamp LH and RH terminals 2
2. through grounds M16 and M70.

And power is supplied

1. through BCM terminal 41
2. to vanity mirror lamp (LH and RH) terminals 1.