Scheme 1
Manual Operation
The driver's seat can be adjusted for sliding, reclining, front cushion height and rear cushion height with the LH power seat switches. The manual operation can be adjusted with the IGN key in any position.
Automatic Operation
The driver's seat is adjusted to the proper positions for the driver automatically, in 3 different ways: MEMORY AUTOMATIC SET, AUTOMATIC EXITING SETTING and AUTOMATIC SET RETURN. (Automatic Drive Positioner = ADP)
CONDITIONS INHIBITING AUTOMATIC OPERATION
Automatic memory setting procedures are suspended under any of the following conditions
- When vehicle speed is more than 7 km/h (4 MPH).
- When driver's side power seat switch is turned on.
- When any two of the switches (set switch and memory switches 1 and 2) are turned ON.
- When cancel switch is turned on.
- When selector lever is in any position other than "P".
- When ignition switch is turned to "START" position. (Operation resumes when ignition switch is returned to "ON".)
- When detention switch malfunction is detected: Detention switch failure is sensed when detention switch remains off for at least 2 seconds at a vehicle speed of greater than 7 km/h (4 MPH).