Home/Infiniti/I30/Infiniti I30 I (1995-1999)/Repair manual/Automatic HVAC System/A/c-Heater System - Automatic: Specifications
Contents Wiring diagrams Section: Automatic HVAC System All sections

A/c-Heater System - Automatic: Specifications Infiniti I30 I

A/C SYSTEM SPECIFICATIONS

ApplicationSpecifications
Compressor TypeCalsonic V6 6-cyl.
Compressor Belt Deflection (1)
New Belt5/32-11/64" (3.9-4.1 mm)
Used Belt11/64-3/16" (4.2-4.6 mm)
System Oil Capacity(2) 8.5 ozs.
Refrigerant (R-134a) Capacity21.2-24.7 ozs.
System Operating Pressures (3)
High Side169-225 psi (11.9-15.9 kg/cm 2 )
Low Side21-26 psi (1.5-1.8 kg/cm 2 )
(1) With 22 lbs. (10kg) applied midway on longest belt run. (2) Use type "S" Oil (Part No. KLH00-PAGS0). (3) With ambient temperature of 86° F (30°C), relative humidity of 50-70% and engine speed of 1500 RPM. Operate for at least 10 minutes before checking.
(1)With 22 lbs. (10kg) applied midway on longest belt run.
(2)Use type "S" Oil (Part No. KLH00-PAGS0).
(3)With ambient temperature of 86° F (30°C), relative humidity of 50-70% and engine speed of 1500 RPM. Operate for at least 10 minutes before checking.

A/C SYSTEM SPECIFICATIONS