WORK SUPPORT
| Service item | Setting item | Setting |
| BATTERY SAVER SET | On (1) | With the exterior lamp battery saver function |
| Off | Without the exterior lamp battery saver function |
| ROOM LAMP BAT SAV SET | On (1) | With the interior room lamp battery saver function |
| Off | Without the interior room lamp battery saver function |
| ROOM LAMP TIMER SET | MODE 1 (1) | 30 min. | Sets the interior room lamp battery saver timer operating time. |
| MODE 2 | 60 min. |
| (1) Factory setting |
WORK SUPPORT MODE REFERENCE CHART
| Monitor item [Unit] | Description |
| REQ SW-DR [On/Off] | The switch status input from request switch (driver side) |
| REQ SW-AS [On/Off] | The switch status input from front request switch (passenger side) |
| REQ SW-RR [On/Off] | NOTE: The item is indicated, but not monitored. |
| REQ SW-RL [On/Off] |
| PUSH SW [On/Off] | The switch status input from push-button ignition switch |
| ACC RLY-F/B [On/Off] | NOTE: The item is indicated, but not monitored. |
| KEY SW-SLOT [On/Off] | Key switch status input from key slot |
| UNLK SEN-DR [On/Off] | Driver door unlock status input from unlock sensor |
| DOOR SW-DR [On/Off] | The switch status input driver side front door switch |
| DOOR SW-AS [On/Off] | The switch status input from passenger side door switch |
| DOOR SW-RR [On/Off] | NOTE: The item is indicated, but not monitored. |
| DOOR SW-RL [On/Off] |
| DOOR SW-BK [On/Off] |
| CDL LOCK SW [On/Off] | Lock switch status received from the door lock and unlock switch by power window switch serial link |
| CDL UNLOCK SW [On/Off] | Unlock switch status received from the door lock and unlock switch by power window switch serial link |
| KEY CYL LK-SW [On/Off] | Lock switch status received from key cylinder switch by power window switch serial link |
| KEY CYL UN-SW [On/Off] | Unlock switch status received from key cylinder switch by power window switch serial link |
| TRNK/HAT MNTR [On/Off] | The switch status input from trunk room lamp switch |
| RKE-LOCK [On/Off] | Lock signal status received from remote keyless entry receiver |
| RKE-UNLOCK [On/Off] | Unlock signal status received from remote keyless entry receiver |
| NOTE |
| The item is indicated, but not monitored. |
| NOTE |
| The item is indicated, but not monitored. |
| NOTE |
| The item is indicated, but not monitored. |
DATA MONITOR MODE DESCRIPTION CHART