Home ReviewsRefund
Home/Infiniti/G37/Infiniti G37 IV рестайлинг (2006-2013)/Repair manual/Automatic Drive Positioner - Sedan/PASSENGER SIDE : Component Function Check
Contents Section: Automatic Drive Positioner - Sedan All sections

PASSENGER SIDE : Component Function Check Infiniti G37 IV рестайлинг

Automatic Drive Positioner - Sedan ~593 words

PASSENGER SIDE : Component Function Check

  1. CHECK FUNCTION Turn ignition switch ON. Select "MIR/SEN RH U-D", "MIR/SEN RH R-L" in "Data monitor" using CONSULT-III. Check the mirror sensor (passenger side) signal under the following conditions. MONITOR ITEM REFERENCE Monitor item Condition Value MIR/SEN RH U-D Door mirror (passenger side) Change between 3.4 [V] (close to peak) 0.6 [V] (close to valley) MIR/SEN RH R-L Change between 3.4 [V] (close to left edge) 0.6 [V] (close to right edge) Is the indication normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «PASSENGER SIDE : DIAGNOSIS PROCEDURE»(ref-356505-S09135918092010022400000) ".
  1. CHECK FUNCTION Turn ignition switch ON. Select "SEAT SLIDE" in "Active test" mode using CONSULT-III. Check the sliding motor operation. ITEM DESCRIPTION Test item Description SEAT SLIDE OFF Seat sliding Stop FR Forward RR Backward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «DIAGNOSIS PROCEDURE»(ref-356505-S10410997482010022400000) ".
  1. CHECK FUNCTION Turn ignition switch ON. Select "SEAT RECLINING" in "Active test" mode using CONSULT-III. Check the reclining motor operation. ITEM DESCRIPTION Test item Description SEAT RECLINING OFF Seat reclining Stop FR Forward RR Backward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «DIAGNOSIS PROCEDURE»(ref-356505-S08548099952010022400000) ".
  1. CHECK FUNCTION Turn ignition switch ON. Select "SEAT LIFTER FR" in "Active test" mode using CONSULT-III. Check the lifting motor (front) operation. ITEM DESCRIPTION Test item Description SEAT LIFTER FR OFF Seat lifting (front) Stop UP Upward DWN Downward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «DIAGNOSIS PROCEDURE»(ref-356505-S33364806142010022400000) ".
  1. CHECK FUNCTION Turn ignition switch ON. Select "SEAT LIFTER RR" in "Active test" mode using CONSULT-III. Check the lifting motor (rear) operation. ITEM DESCRIPTION Test item Description SEAT LIFTER RR OFF Seat lifting (rear) Stop UP Upward DWN Downward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «DIAGNOSIS PROCEDURE»(ref-356505-S11835796182010022400000) ".
  1. CHECK FUNCTION Turn ignition switch ON. Select "TILT MOTOR" in "Active test" mode using CONSULT-III. Check the tilt motor operation. ITEM DESCRIPTION Test item Description TILT MOTOR OFF Steering tilt Stop UP Upward DWN Downward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «DIAGNOSIS PROCEDURE»(ref-356505-S16272142922010022400000) ".
  1. CHECK FUNCTION Turn ignition switch ON. Select "TELESCO MOTOR" in "Active test" mode using CONSULT-III. Check the telescopic motor operation. ITEM DESCRIPTION Test item Description TELESCO MOTOR OFF Steering telescopic Stop FR Forward RR Backward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «DIAGNOSIS PROCEDURE»(ref-356505-S38754762922010022400000) ".
  1. CHECK DOOR MIRROR MOTOR FUNCTION Turn ignition switch ON. Select "DOOR MIRROR MOTOR" in "Active test" mode using CONSULT-III. Check the door mirror motor operation. ITEM DESCRIPTION Test item Description DOOR MIRROR MOTOR LH OFF Door mirror face Stop L Outward R Inward UP Upward DWN Downward ITEM DESCRIPTION Test item Description DOOR MIRROR MOTOR RH OFF Door mirror face Stop L Inward R Outward UP Upward DWN Downward Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «DIAGNOSIS PROCEDURE»(ref-356505-S39888583482010022400000) ".
  1. CHECK FUNCTION Turn ignition switch ON. Select "MEMORY SW INDCTR" in "Active test" mode using CONSULT-III. Check the memory indicator operation. ITEM DESCRIPTION Test item Description MEMORY SW INDCTR OFF Memory switch indicator OFF ON-1 Indicator 1: ON ON-2 Indicator 2: ON Is the operation of relevant parts normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «DIAGNOSIS PROCEDURE»(ref-356505-S23606121772010022400000) ".