DRIVER SIDE : Component Function Check
- CHECK FUNCTION Turn ignition switch ON. Select "MIR/SEN LH U-D", "MIR/SEN LH R-L" in the "Data monitor" using CONSULT-III. Check mirror sensor (driver side) signal under the following condition. MIRROR SENSOR (DRIVER SIDE) SIGNAL CHECKING CONDITIONS Monitor item Condition Value MIR/SEN LH U-D Door mirror (driver side) Change between 3.4 [V] (close to peak) 0.6 [V] (close to valley) MIR/SEN LH R-L Change between 0.6 [V] (close to left edge) 3.4 [V] (close to right edge) Is the indication normal? YES: INSPECTION END NO: Perform diagnosis procedure. Refer to " «DRIVER SIDE : DIAGNOSIS PROCEDURE»(ref-336715-S09128974382009072900000) ".