Application Items
| Icon | Description | Refer to |
|---|---|---|
| View | Map display mode can be switched. | "VIEW" MODE |
| Heading | Heading of the map display can be customized for either north heading or the actual driving direction of the vehicle. | "HEADING" MODE |
| Nearby Display Icons | Icons of facilities can be displayed. | "NEARBY DISPLAY ICONS" MODE |
| Nearby Display Icons | Facilities to be displayed can be selected from the variety selections. | "NEARBY DISPLAY ICONS" MODE |
| Save Current Location | Current vehicle location can be registered in Address Book. | "SAVE CURRENT LOCATION" MODE |
| Adjust Current Location | Current location of position marker can be adjusted. Direction of position marker also can be calibrated when heading direction of the vehicle on the display is not matched with the actual direction. | "ADJUST CURRENT LOCATION" MODE |
| Auto-Re-route ON/OFF | ON/OFF of Auto Re-route can be switched. | "AUTO RE-ROUTE" MODE |
| Avoid Area Setting | A particular area can be avoided when routing. | "AVOID AREA SETTING" MODE |
| Button Tone/Beep Response | Button tone can be selected ON/OFF | "BUTTON TONE/BEEP RESPONSE" MODE |
| Clear Memory | Address Book, Previous destination or Avoid area can be deleted. | "CLEAR MEMORY" MODE |
| Edit Address Book | Address Book can be edited. | "EDIT ADDRESS BOOK" MODE |
| GPS Information | The GPS data includes longitude, latitude and altitude (distance above sea level) of the present vehicle position, and current date and time for the area in which the vehicle is being driven. | "GPS INFORMATION" MODE |
| GPS Information | Also indicated are the GPS reception conditions and the GPS satellite position. | "GPS INFORMATION" MODE |
| Quick Stop Customer Setting | One facility of your selection can be added to your Quick Stop. | "QUICK STOP CUSTOMER SETTING" MODE |
| Set Average speed | Average vehicle speed can be set to calibrate estimated journey time for the destination. | "SET AVERAGE SPEED" MODE |
| Tracking | Tracking to the present vehicle position can be displayed. | "TRACKING" MODE |
APPLICATION ITEMS DESCRIPTION
Scheme 234
- Select "Bird view(tm)" or "Plan view" icon. To open the map screen display with Bird View(tm), select "Bird View(tm)". To open the map screen display with Plan View, select "Plan View".
Scheme 235
- To display North up, select "North up".
- To display the car heading up, select "Heading up".
Scheme 236
- Select an icon to display on the map screen.
Scheme 237
- The current vehicle location can be registered in "Address Book". NOTE: "Address Book" can store 50 items max.
Scheme 238
Scheme 239
- Select an icon "right" or "left" to calibrate the heading direction. (Arrow marks will rotate corresponding to the calibration key.)
- Select "Set". Then the vehicle mark will be matched to the arrow mark.
Scheme 240
- To Perform the auto re-route of route, select "On".
- Not to perform the auto re-route of route, select "Off".
Scheme 241
- Areas to avoid can be registered.
Scheme 242
- If beep is required, select "On".
- If no beep is required, select "Off".
Scheme 243
- To delete all the stored places in "Address Book", "Avoid Area" and "Previous Dest", select "Yes".
Scheme 244
- Edit the items registered in Address Book.
Scheme 245
- Latitude, longitude, altitude, astrometric state, and satellite location are displayed as GPS information. NOTE: Altitude is displayed only in three-dimensional status.
Scheme 246
- Select a category for the "Quick Stop" menu.
Scheme 247
- Set the average vehicle speed to calibrate the estimated journey time for the destination.
- Set three items; "Freeway", "Main Roads", and "Ordinary Roads".
Scheme 248
- To leave no trail on the map, select "Off".
- To leave a trail in the map, select "On". NOTE: When a trail display is turned OFF, trail data is erased from the memory.