Home/Infiniti/G20/Infiniti G20 I (1991-1996)/Repair manual/Procedures/Maintenance Information: Specifications
Contents Wiring diagrams Section: Procedures All sections

Maintenance Information: Specifications Infiniti G20 I

Procedures ~127 words

WHEEL & TIRE SPECIFICATIONS

Tire specifications are imprinted on the tire side wall. The recommended cold tire inflation pressures are listed on the underside of the center console.

CAUTIONDO NOT mix tires of different design such as radials with bias or bias-belted tires. Mixing tire types will adversely affect road handling and may lead to loss of vehicle control. DO NOT use tire chains on compact (T-type) spare tires.

WHEEL TIGHTENING SPECIFICATIONS

Tighten all wheel lug nuts to 72-87 ft. lbs. (98-118 N.m). Always tighten wheel lug nuts in a crisscross pattern.

BATTERY SPECIFICATIONS

CAUTIONWhen battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION Section.

Battery is located in the engine compartment. Under normal conditions, battery delivered with vehicle is maintenance free and does not require additional water. However, under severe conditions it is advisable to check battery fluid periodically to ensure adequate fluid level. Electrolyte level should be between the MIN and MAX marks on the battery case. If it becomes necessary to add water to battery, use only distilled water. DO NOT overfill battery.