Component Function Check
- CHECK OPERATION OF METER BUZZER Select "BUZZER" of "BCM" on CONSULT-III. Perform "LIGHT WARN ALM" of "ACTIVE TEST". Does meter buzzer beep? YES: INSPECTION END NO: GO TO 2 .
- CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL Select the "Data Monitor" for the "METER/M&A" and check the "BUZZER" monitor value. BUZZER Under the condition of buzzer input: On Except above: Off Is the inspection result normal? YES: Replace combination meter. NO: Replace BCM. Refer to «REMOVAL AND INSTALLATION»(ref-368889-S23875774822010081300000) .
- CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL Select the "Data Monitor" for the "METER/M&A" and check the "BUCKLE SW" monitor value. BUCKLE SW When seat belt is fastened: Off When seat belt is unfastened: On INSPECTION END