Home ReviewsRefund
Home/Infiniti/FX45/Infiniti FX45 I рестайлинг (2005-2009)/Repair manual/Body, Lock & Security System/INPUTS
Contents Section: Body, Lock & Security System All sections

INPUTS Infiniti FX45 I рестайлинг

Body, Lock & Security System ~386 words

INPUTS

Power is supplied at all times

  1. to BCM terminal 55
  2. through 50A fusible link (letter M , located in the fuse and fusible link box).
  3. to BCM terminal 42
  4. through 15A fuse [No. 22, located in the fuse block (J/B)].
  5. to Horn relay terminal 2
  6. through 15A fuse (No. 34, located in the fuse and fusible link box). When the key switch is ON (key is inserted in ignition key cylinder), power is supplied
  7. to BCM terminal 37
  8. through key switch terminal 1 and 2
  9. through 15A fuse [No. 22, located in the fuse block (J/B)]. When the ignition switch is ACC or ON, power is supplied
  10. to BCM terminal 11
  11. through 10A fuse [No. 6, located in the fuse block (J/B)]. When the ignition switch is ON or START, power is supplied
  12. to BCM terminal 38
  13. through 15A fuse [No. 1, located in the fuse block (J/B)]. When the front door switch (driver side) is ON (door is OPEN), ground is supplied
  14. to BCM terminal 62
  15. through front door switch (driver side) terminal 1
  16. through front door switch (driver side) case ground. When the front door switch (passenger side) is ON (door is OPEN), ground is supplied
  17. to BCM terminal 12
  18. through front door switch (passenger side) terminal 1
  19. through front door switch (passenger side) case ground. When the rear door switch LH is ON (door is OPEN), ground is supplied
  20. to BCM terminal 63
  21. through rear door switch LH terminal 1
  22. through rear door switch LH case ground. When the rear door switch RH is ON (door is OPEN), ground is supplied
  23. to BCM meter terminal 13
  24. through rear door switch RH terminal 1
  25. through rear door switch RH case ground. When the back door switch is ON (door is open), ground is supplied
  26. to BCM terminal 58
  27. through back door closure motor (door switch) terminals 7 and 8
  28. through body grounds B15 and B45 Key fob signal is inputted to remote keyless entry receiver (the antenna of the system is built in remote keyless entry receiver).
  29. to BCM terminal 20
  30. from remote keyless entry system controls operation of the The remote keyless entry system controls operation of the
  31. power door lock
  32. hazard and horn reminder
  33. auto door lock
  34. panic alarm
  35. keyless power window down (open)
  36. room lamp and key ring illumination