Home ReviewsRefund
Home/Infiniti/FX35/Infiniti FX35 II рестайлинг (2011-2013)/Repair manual/Automatic Drive Positioner/Memory Storage Procedure
Contents Section: Automatic Drive Positioner All sections

Memory Storage Procedure Infiniti FX35 II рестайлинг

Automatic Drive Positioner ~252 words

Memory Storage Procedure

Two positions for the driver seat, steering column and outside mirror can be stored for memory operation by following procedure

  1. STEP 1 Shift A/T selector lever to P position. : GO TO 2.
  2. STEP 2 Turn ignition switch ON. : GO TO 3.
  3. STEP 3 Adjust driver seat, steering column and outside mirror position manually. : GO TO 4.
  4. STEP 4 Push set switch. NOTE: Memory indicator for which driver seat position is already retained in memory is illuminated for 5 seconds. Memory indicator for which driver seat position is not retained in memory is illuminated for 0.5 second. Push the memory switch (1 or 2) for at least 1 second within 5 seconds after pushing the set switch. NOTE: To enter driver seat positions into blank memory, memory indicator will be turned on for 5 seconds. To modify driver seat positions, memory indicator will be turned OFF for 0.5 second, then turned ON for 5 seconds. NOTE: If memory is stored in the same memory switch, the previous memory will be deleted. Do you need linking of Intelligent Key? YES: GO TO 6 . NO: GO TO 5.
  5. STEP 5 Confirm the operation of each part with memory operation. : END
  6. STEP 6 Push the Intelligent Key unlock button within 5 seconds after pushing memory switch (while the memory indicator is turned ON). : GO TO 7.
  7. STEP 7 Confirm the operation of each part with memory operation and Intelligent Key interlock operation. : END