Home/Hyundai/Tucson/Hyundai Tucson II (2009-2015)/Repair manual/Oem General Information/General Information - Automatic Transaxle System: Specifica…
Contents Wiring diagrams Section: Oem General Information All sections

General Information - Automatic Transaxle System: Specifications Hyundai Tucson II

Specifications

ItemSpecification
Transmission typeA6MF1
Engine modelGasoline 2.0Gasoline 2.4
Torque converter type3-element, 1-stage, 2-phase type
Torque converter sizeØ236 mm (9.2913 in.)
Oil pump systemParachoid
Friction elementsClutch: 2EA
Brake: 3EA
OWC: 1EA
Planetary gear3EA
Gear ratio1st4.1624.212
2nd2.5752.637
3rd1.7721.800
4th1.3691.386
5th1.0001.000
6th0.7780.772
Reverse3.5003.385
Final gear ratio3.6483.915
Fluid pressure balance piston3EA
Accumulator4EA
Solenoid valve8EA (VFS: 6EA, ON/OFF: 2EA)
Shift lever position4 Range (P, R, N, D)
Oil filter1EA

AUTOMATIC TRANSAXLE SYSTEM SPECIFICATIONS

VFS: Variable Force Solenoid

Tightening Torques

ItemN.mKgf.m
TCM installation mounting bolt7.8 ~ 11.80.8 ~ 1.2
Shift cable bracket mounting bolt14.7 ~ 21.61.5 ~ 2.2
Input shaft speed sensor mounting bolt9.8 ~ 11.81.0 ~ 1.2
Output shaft speed sensor mounting bolt9.8 ~ 11.81.0 ~ 1.2
Shift lever assembly bolt8.8 ~ 13.70.9 ~ 1.4
Inhibitor switch mounting bolt9.8 ~ 11.81.0 ~ 1.2
Valve body cover mounting bolt9.8 ~ 11.81.0 ~ 1.2
Eyebolt34.3 ~ 44.13.5 ~ 4.5
Oil drain plug34.3 ~ 44.13.5 ~ 4.5
Oil level plug34.3 ~ 44.13.5 ~ 4.5
Torque converter mounting bolt45.1 ~ 52.04.6 ~ 5.3
Automatic transaxle upper mounting bolt42.2 ~ 53.94.3 ~ 5.5
Automatic transaxle lower mounting bolt42.2 ~ 53.94.3 ~ 5.5
Automatic transaxle support bracket bolt88.3 ~107.99.0~11.0

TIGHTENING TORQUES SPECIFICATIONS