Compass Mirror: Adjustments Hyundai Tucson I

Calibration Procedure

If the display read "C", calibrate the compass.

1. Driving the vehicle in a circle at less than 8km/h 3 times or until the compass heading appears.
2. Driving in a circle in right-handed direction and opposite direction are possible, and if the calibration is completed, the compass heading will appear.
3. Keep driving in a circle until a compass heading appears.

TO ADJUST THE ZONE SETTING

1. Determine the desired Zone Number based upon your current location on the Zone Maps below. (Scheme 15)
2. Press and hold the Feature Control button (A) for more than 6 but less than 9 seconds, the current Zone Number will appear on the display.
3. Pressing and holding the Feature Control button again will cause the numbers to increment (Note: they will repeat (...13, 14, 15, 1, 2,..). Releasing the button when the desired Zone Number appears on the display will set the new Zone.
4. Within about 5 seconds the compass will start displaying a compass heading again.

TO RE-CALIBRATE THE COMPASS

1. Press and hold the Feature Control button (A) for more than 9 seconds. When the compass memory is cleared a "C" will appear in the display (B).
2. To calibrate the compass, drive the vehicle is 2 complete circles at less than 5 MPH.

Scheme 15