Home/Hyundai/Tiburon/Hyundai Tiburon I (1996-1999)/Repair manual/Procedures/Maintenance Information: Specifications
Contents Wiring diagrams Section: Procedures All sections

Maintenance Information: Specifications Hyundai Tiburon I

TIRE SPECIFICATIONS

CAUTIONDO NOT mix tires of different design such as steel belted radials with radial bias belted or bias ply tires. Mixing tire types will adversely affect road handling and may lead to loss of vehicle control. When using snow tires, they must be installed on all four wheels for maneuverability and safety. DO NOT use tire chains on rear wheels.

Tire specifications are imprinted on the tire sidewall. The recommended cold tire inflation pressures are listed on a label located on the left door frame. These pressures provide the best combination of ride comfort, tire wear and stability under normal conditions.

WHEEL TIGHTENING SPECIFICATIONS

Wheel TypeFt. Lbs. (N.m.)
All Models65-80 (90-110)

WHEEL TIGHTENING SPECIFICATIONS

BATTERY SPECIFICATIONS

CAUTIONWhen battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION Section.

Replace battery with group MF 68AH.