FUSIBLE LINKS & FUSES INFORMATION
Note. * Use designated fuses only.
| DESCRIPTION | AMPERAGE | CIRCUIT PROTECTED | ||
|---|---|---|---|---|
| FUSIBLE LINKS | ALT. | 150A | Fusible Link (ABS1, ABS2, RR HTD, Blower) | |
| ABS-1 | 40A | ABS/ESP Control Module Multipurpose Check Connector | ||
| ABS-2 | 20A | ABS/ESP Control Module Multipurpose Check Connector | ||
| BLOWER | 40A | Blower Relay | ||
| ECU RLY | 30A | Engine Control Relay | ||
| I/P B+. 1 | 40A | Fuse 23, 24, 30, 31, 32, 33, 34, 35 | ||
| I/P B+. 2 | 30A | Power Connectors-1,-2 (Fuse 21, 22) | ||
| IGN-1 | 30A | Ignition Switch (ACC, IG1) | ||
| IGN-2 | 40A | Ignition Switch (IG2, START) Start Relay | ||
| P/WDW | 40A | Power Window Relay (Fuse 15) | ||
| RR HTD | 40A | Defogger Relay | ||
| FUSES | 1 | HORN | 15A | Horn Relay |
| 2 | TAIL LP | 20A | Tail Lamp Relay | |
| 3 | ECU | 10A | PCM | |
| 4 | IGN-1 | 10A | (SPARE) | |
| 5 | DRL | 15A | DRL Control Module | |
| 6 | FR FOG | 15A | Front Fog Lamp Relay | |
| 7 | A/CON | 10A | A/C Relay | |
| 8 | F/PUMP | 20A | Fuel Pump Relay | |
| 9 | DIODE | (SPARE) | ||
| 10 | ATM | 20A | ATM Control Relay | |
| 11 | STOP | 15A | Stop Lamp Switch | |
| 12 | H/LP LO RH | 15A | (SPARE) | |
| 13 | SUNROOF | 15A | Sunroof Control Module | |
| 14 | H/LP WASHER | 20A | (SPARE) | |
| 15 | H/LP HI | 20A | Head Lamp Relay (High) | |
| 16 | ECU | 10A | PCM (3.3L) | |
| 17 | SENSOR-3 | 10A | A/C Relay Cooling Fan Relay Injectors | |
| 18 | SENSOR-1 | 15A | MAF Sensor Canister Close Valve Oil Control Valve SMATRA | |
| 19 | SENSOR-2 | 15A | Oxygen Sensors Fuel Pump Relay | |
| 20 | B/UP | 10A | Back-up Lamp Switch Pulse Generator Vehicle Speed Sensor | |
| 21 | IGN COIL | 20A | Ignition Coil, Condenser | |
| 22 | ECU | 10A | PCM | |
| 23 | H/LP LO | 20A | Head Lamp Relay (Low) | |
| 24 | ABS | 10A | ABS/ESP Control Module Multipurpose Check Connector | |
IDENTIFYING FUSIBLE LINKS & FUSES (ENGINE COMPARTMENT)
FUSE INFORMATION
CIRCUIT
Note. *Use designated fuses only.
| FUSE | AMPERAGES | CIRCUIT PROTECTED |
|---|---|---|
| 1 | 15A | (SPARE) |
| 2 | 15A | Seat Warmer Switch |
| 3 | 10A | BCM Home Link Connector Sunroof Control Module |
| 4 | 10A | Active Incar & Humidity Sensor Instrumemt Cluster |
| 5 | 20A | Cigarette Lighter |
| 6 | 15A | (SPARE) |
| 7 | 10A | Illumination Lamps Glove Box Lamp Head Lamp (RH) License Lamp (RH) Rear Combination Lamp (RH) |
| 8 | 10A | Front Fog Lamp Relay Head Lamp (LH) License Lamp (LH) Rear Combination Lamp (LH) |
| 9 | 10A | (SPARE) |
| 10 | 10A | AQS & Ambient Sensor DRL Control Module Head Lamp Relay |
| 11 | 25A | Wiper & Washer |
| 12 | 10A | A/C Control Module |
| 13 | 15A | SRS Control Module Passenger Seat Track Position Sensor Telltale Lamp |
| 14 | 20 | Front Accessory Socket Rear Power Outlet |
| 15 | 10 | ATM Key Lock Control Module Audio Digital Clock Power Outside Mirror Switch |
| 16 | 25A | Safety Window Module |
| 17 | 15A | (SPARE) |
| 18 | 10A | ATM Key Lock Control Module Tire Pressure Monitoring Module |
| 19 | 25A | Power Window Main Switch Left Rear Power Window Switch |
| 20 | 30A | Power Window Main Switch Right Power Window Switch |
| 21 | 20A | Audio Amp. JBL Amp. |
| 22 | 20A | Door Lock/Unlock Relay |
| 23 | 10A | Hazard Relay Hazard Switch |
| 24 | 30A | (SPARE) |
| 25 | 10A | Instrument Cluster |
| 26 | 10A | Hazard Switch |
| 27 | 10A | BCM ESP Switch Instrument Cluster Yaw Rate Sensor |
| 28 | 15A | (SPARE) |
| 29 | 10A | Burglar Alarm Relay |
| 30 | 15A | Adjustable Pedal Relay |
| 31 | 15A | (SPARE) |
| 32 | 15A | Fuel Filler Switch Trunk Lid Switch Trunk Lid Relay |
| 33 | 15A | (SPARE) |
| 34 | 30A | Power Seat Manual Switch (LH) |
| 35 | 10A | Key Solenoid Sport Mode Switch |
| 36 | 10A | A/C Control Module Outside Mirror Motor |
| Power Conn.1 | 15A | Audio |
| Power Conn.2 | 15A | A/C Control Module BCM Courtesy Lamps Digital Clock Instrument Cluster |
IDENTIFYING FUSES (PASSENGER COMPARTMENT)
HAZARD LAMP
Check for continuity between the terminals.
- There should be continuity between the No. 12 and No. 13 terminals when power and ground are connected to the No. 13 and No.3 in the M91-2 terminals.
- There should be no continuity between the No.12 and No.13 terminals when power is disconnected.
BURGLAR ALARM HORN
Check for continuity between the terminals.
- There should be continuity between the No.8 and No.9 terminals when power and ground are connected to the No.1 and No.8 in the M91-2 terminals.
- There should be no continuity between the No.8 and No.9 terminals when power is disconnected.
BURGLAR ALARM
Check for continuity between the terminals.
- There should be no continuity between the No.11 and No. 10 terminals when power and ground are connected to the No.11 and No.4 in the M91-2 terminals.
- There should be continuity between the No. 11 and No.10 terminals when power is disconnected.
DRIVER DOOR TWO TURN UNLOCK
Check for continuity between the terminals.
- There should be continuity between the No.7 and No.4 terminals when power and ground are connected to the No.6 and No.4 in the M91-1 terminals.
- There should be continuity between the No.7 and No.5 terminals when power and ground are disconnected.