LUBRICATION SPECIFICATIONS
| Material | Condition | Specification |
|---|
| Engine Oil (1) | Ambient Temperature Above 32°F ( 0°C) To Over 100°F (38°C) | SAE 20W-40 SAE 20W-50 |
| Engine Oil (1) | Ambient Temperature Above -10 (-23°C) To Over 100°F (38°C) | SAE 10W-30 SAE 10W-40 SAE 10W-50 |
| Engine Oil (1) | Ambient Temperature Less Than -20°F (-30°C) To 95°F (35°C) | SAE 5W-30 SAE 5W-40 |
| Engine Coolant | All | 50/50 Mixture Distilled Water Ethylene Glycol |
| Brake Fluid | All | DOT 3 |
| Automatic Transaxle Fluid | All | Hyundai ATF, Diamond ATF SP-II or Autran MMSP-II |
| Manual Transaxle Fluid | All | API Classification GL-4 SAE 75W/85W |
| Rear Wheel Bearing | All | Multipurpose Grease NLG1 #2 |
| Multi- purpose Grease | All | Multipurpose Grease NLG1 #2 |
| Door Hinges Trunk Hinges | All | Engine Oil |
| Power Steering | All | ATF DEXRON II |
| A/C Refrigerant | All | R-134a |
| A/C Refrigerant Oil | All | Poly Alkylene Glycol Oil |
| (1) A multi-grade approved oil with Starburst Symbol API Classification SG or SG/CD is recommended. |
| (1) | A multi-grade approved oil with Starburst Symbol API Classification SG or SG/CD is recommended. |
LUBRICATION SPECIFICATIONS
FLUID CAPACITIES
| Item | Condition | (1) Specification |
|---|
| Engine Oil | 2.0L: Drained, With Filter | 3.91 Qts. (3.7L) |
| Engine Oil | 2.0L: Drained | 3.49 Qts. (3.3L) |
| Engine Oil | 3.0L: Drained, With Filter | 4.23 Qts. (4.0L) |
| Engine Oil | 3.0L: Drained | 3.25 Qts. (3.7L) |
| Engine Coolant | 2.0L: Drained | 7.7 Qts. (7.3L) |
| Engine Coolant | 3.0L: Drained | 9.0 Qts. (7.6L) |
| Automatic Transaxle | 2.0L: Capacity | 6.4 Qts. (6.1L) |
| Automatic Transaxle | 3.0L: Capacity | 7.9 Qts. (7.5L) |
| Manual Transaxle | Capacity | 1.9 Qts. (1.8L) |
| Power Steering | Capacity | 0.95 Qts. (0.9L) |
| A/C Refrigerant | Evacuated | 1.6 Lbs (725g) |
| Fuel Tank | Capacity | 17.2 Gal. (65.0L) |
| (1) Capacities are recommended or calculated levels. Always use dipstick (if available) to measure level. |
| (1) | Capacities are recommended or calculated levels. Always use dipstick (if available) to measure level. |
TIRE SPECIFICATIONS
| CAUTION | DO NOT mix tires of different design such as steel belted radials with radial bias belted or bias ply tires. Mixing tire types will adversely affect road handling and may lead to loss of vehicle control. When using snow tires, they must be installed on all four wheels for maneuverability and safety. DO NOT use tire chains on rear wheels. |
Tire specifications are imprinted on the tire sidewall. The recommended cold tire inflation pressures are listed on a label located on the left door frame. These pressures provide the best combination of ride comfort, tire wear and stability under normal conditions.
WHEEL TIGHTENING SPECIFICATIONS
| Wheel Type | Ft. Lbs. (N.m.) |
|---|
| All Models | 65-80 (90-110) |
WHEEL TIGHTENING SPECIFICATIONS
BATTERY SPECIFICATIONS
| CAUTION | When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION Section. |
