Home/Hyundai/Sonata/Hyundai Sonata III (1993-1996)/Repair manual/Specifications/Engine Controls - Specifications: Specifications
Contents Wiring diagrams Section: Specifications All sections

Engine Controls - Specifications: Specifications Hyundai Sonata III

SERVICE INTERVALS & SPECIFICATIONS

ComponentInterval (Miles)
Air Filter30,000
Automatic Transaxle Fluid30,000
Brake Fluid30,000
Coolant30,000
Fuel Filter52,500
Oil & Filter7500
Spark PlugsEvery 70,000 on 3.0L 30,000
Timing BeltEvery 70,000 on 3.0L 60,000

REPLACEMENT INTERVALS

Engine Application(1) Deflection New Belt - In. (mm)(1) Deflection Used Belt - In. (mm)
2.0L
Alternator.30-.35 (7.5-9.0).39 (10.0)
A/C.20-.22 (5.0-5.5).24-.28 (6.0-7.0)
P/S.24-.35 (6.0-9.0)(2)
3.0L
Alternator & P/S.16-.20 (4.0-5.0).28 (7.0)
A/C.18-.22 (4.5-5.5)(2)
(1) Deflection with 22 lbs. (10 kg) pressure applied midway on belt run. (2) Information is not available from manufacturer.
(1)Deflection with 22 lbs. (10 kg) pressure applied midway on belt run.
(2)Information is not available from manufacturer.

DRIVE BELT ADJUSTMENT

CAPACITIES

ApplicationGroup SizeCCA Rating
2.0L25420
3.0L24540

BATTERY SPECIFICATIONS

Note. Refill capacities are approximate. Correct fluid level should be determined by mark on dipstick, if applicable.

ApplicationQuantity
Automatic Transaxle (Dexron-II E)
2.0L6.4 Qts. (6.1L)
3.0L6.1 Qts. (5.8L)
Cooling System (Includes Heater & Reserve Tank)
2.0L7.7 Qts. (7.3L)
3.0L9.0 Qts. (8.5L)
Crankcase (Includes Filter)
2.0L3.9 Qts. (3.7L)
3.0L4.2 Qts. (4.0L)
Manual Transaxle (SAE 75W-85/API GL-4)1.9 Qts. (1.8L)
Power Steering (Dexron-II)1.0 Qt. (.9L)

FLUID CAPACITIES