Code P0732 2nd gear incorrect ratio
| Code P0732 2nd gear incorrect ratio | Probable cause |
|---|---|
| If the output from the output shaft speed sensor multiplied by the 2nd gear ratio is not the same as the output from the input shaft speed sensor after shifting to 2nd gear has been completed, diagnostic trouble code P0732 is output. If diagnostic trouble code P0732 is output four times, the transaxle is locked into 3rd gear as a fail-safe measure. | Malfunction of the input shaft speed sensor Malfunction of the output shaft speed sensor Malfunction of the underdrive clutch retainer Malfunction of the transfer drive gear or driven gear Malfunction of the second brake system Malfunction of the underdrive clutch system Noise generated |
DIAGNOSTIC TROUBLE CODE NO. P0732 - 2ND GEAR INCORRECT RATIO
