ALIGNMENT PROCEDURES
Note. Alignment procedures not available.
| Application | Specification | ||
|---|---|---|---|
| Front | |||
| Camber in Degrees | |||
| Fraction | 1/2 +/- 1/2 | ||
| Decimal | .500 +/- .500 | ||
| Caster in Degrees | |||
| Fraction | 53/64 +/- 21/64 | ||
| Decimal | .833 +/- .333 | ||
| Toe-In in Inches | |||
| Fraction | 3/64 +/- 1/8 | ||
| Decimal | .042 +/- .125 | ||
| Toe-In in Degrees | |||
| Fraction | 5/64 +/- 1/4 | ||
| Decimal | .083 +/- .250 | ||
| Toe-Out in Turns | |||
| Inner | 35.6° | ||
| Outer | 29.3° | ||
| Steering Axis Inclination (SAI) | 12 3/4° | ||
WHEEL ALIGNMENT SPECIFICATIONS